The Amped extender is the most ideal solution for all network devices. It extends the network range of any network device. The network range of this network device is more powerful & reliable. The Dual 600 mW amplifiers are powered by the range extender device that accurately amplifies the network range. If you use a wireless router and its WiFi signal is weak, its network signal is not able to cover the whole area well. Then, you can use an Amped High power range extender device with your traditional router. Because it simply extends the network range in any network device. If you wish to get stable network connectivity in all areas of your home then you can easily get the network connectivity. The network connectivity of this device entirely eliminates the WiFi dead zones.
The Amped range extender has built-in 5Dbi antennas that wider the network coverage as well as network signals. It absolutely works with any router like 802.11N, 802.11B, or 802.11G. Thus, this device takes the network signals from the traditional device and then enhances the network signals of your traditional device. The setup of this range extender device is simple & not complex. Just use one button and effortlessly perform the setup in a quick manner.
Issues about Amped High Power Range Extender
If you use the range extender for the wireless router then it accurately amplifies the network signals. But sometimes many issues come up and you cannot get the high-range network speed of this device. The issue is related to the Amped range extender device.
- Not connect to the existing network
- Not extend the network coverage
- Extender LEDs light flashing orange
- Not connect to the internet
- WiFi LEDs light solid red
- Not turning ON
- Range extender not showing up
- Not accepting password
Troubleshoot Amped High Power Range Extender Issues
If you really wish to manually solve these issues related to the Amped range extender device then you need to follow some steps. In the given below, there are some troubleshooting steps that completely solve the various issues.
Reposition of Amped range extender device
If the range extender device is not connected to the wireless router then you can easily fix this issue. To fix this issue, you need to reposition the extender device position. Sometimes your router and range extender device is often on the long-distance due to which the extender is not connected to the router. If you really want to fix the not connecting issue, you need to place your traditional wireless router closer to the Amped range extender device. After that, it properly takes the network signals and accurately amplifies the network signals. Then you really stream the 4K videos & play gaming consoles without any lag.
Modify the network password
If the network signals of the range extender device are slow or weak then you need to modify the network password. Because the admin password is known to everyone and everyone connects their client devices to this device to increase the network signals. To improve the range of network signals, you should change the network password. But for this, you get the web page of the range extender device. With setup.ampedwireless.com, you can easily get the web page and go to the setting and easily change the admin password of this device.
Switch off 2.4 GHz networks
If you really get the high-range network signals with the Amped wireless network extender then you can switch off 2.4 GHz networks. To get the high-range network signals, you can enable the 5GHz networks. You can use the web interface and input the Amped extender’s IP address. Then, go to the range extender setting and select the wireless setting. Under this setting, you choose the network option and disable the 2.4 GHz network and instantly enable the 5GHz network. After enabling this network, you can click the save option.
Verify the high power range extender firmware version
If the LEDs light of the Amped range extender device is blinking orange then you need to check the firmware version. If the firmware version is not the latest that means outdated then the LEDs light blinking orange. To fix this issue, you need to update the firmware version with the latest version firmware file.
Use wired network connectivity
Sometimes the wireless network connectivity is not stable. To fix the weak or interrupted network signals connectivity you can use wired network connectivity. But for this, you need to verify this range extender device supports LAN ports. Thus, this extender device accurately supports LAN ports. Then, with the LAN ports of this device, you can easily make the wired network connection.
Restart the Amped extender device
If the Amped range extender device is not working perfectly then the solution is you can restart the range extender device. Just using the power ON/OFF button but for this, you should unplug all the wires. After that, smoothly press the power button and restart the range extender device.
How is a Tplink device best compared to the traditional extender?