The WiFi Blast Repeater helps to improve the coverage of your network connection. With the WLAN connection, you can access the network connection with the help of your computers and laptops. The wireless repeater is compiled with IEEE 802.11b, IEEE 802.11g, IEEE 802.11n WiFi standards. It offers a high speed of 300 Mbps which you can locate anywhere around your house. Still get amazing and powerful internet speed. Moreover, it enables two strong modes: the repeater mode and the access point mode. The repeater mode helps you to provide strong and powerful wifi speed. The access point lets you create a new access point for your router.
The wifi blast wireless repeater can be configured easily without taking your extra time. It hardly takes only five minutes which you can do with the help of the WPS button. You have to press the WPS button and it seamlessly supports the WPA/WPA2, WEP, WPA, WPA2 wifi security protocols for the safety of your network device.
WiFi Blast Repeater Login and Setup
Without Setting down the physical cable connection, it can speed up the range of the WiFi Blast Repeater. It is compatible with the 2.4 GHz connection band which offers 300 Mbps of high speed. In the setup and login process of the router. You can simply set up with the existing wifi name and the default wifi password. For that, you need to connect the repeater either with the wired connection using an Ethernet cable that is directly used in the Ethernet port of the device or you can use the network SSID name for the wireless connection.
Setup of the WiFi Blast Repeater
As you know you can configure the repeater in two simple and basic ways. You can either choose a wired connection or a wireless connection. If you are going with the wired connection. Then it requires an Ethernet cable that directly connects one end to the repeater. Also the other end into the laptop or computer. This is the safest and reliable method if you are looking for stability in the internet connection. There is less chance of signal dropping if you are setting up with the wired connection.
In the wireless connection, you need the network SSID name and network key. If you don’t know your SSID name or network key. Then you can check the label on the top of the device in which all the details are mentioned. In case the label does not provide you the basic information. Then the username and password name is an admin. If you are logging into the device for the very first time.
Login to the Repeater
The wifiblast repeater helps you to access the login page of the wireless repeater by providing your credential details and here you go. As you know you can find the username and the default password on the label of the repeater and also in the manual guide. To access the login page you should know the IP address which is 192.168.l0.1, the wifi blast username which is an admin, and the wifi blast password which is also an admin.
Access the login page using the web user interface. So basically you have to open the internet browser on your PC. Try typing the IP address in the search bar. It will also access you to the log-in page in which you have to enter the details of your default username and wifi password in the empty two bars. By providing the right and relevant details you are safely accessed to the login page of the repeater.
WiFi Blast Repeater troubleshooting tip for NO WiFi Connection
If you are also looking for why your repeater won’t connect to wifi connection then you are on the right page. This is a very frequent matter. This simply means that you have not updated the firmware of your repeater. You have an outdated version not the latest version of your repeater. So to update the forward, ensure that the repeater. The device should have connected to the power adapter and receive a good amount of electricity connection. Now go to the settings of the repeater and look for the firmware update. If you find any update then you can update by tapping into the ‘yes’ button.
This process will take some time and it will ask you the authentication about the repeater in which you have to tap on the ‘yes’ button for the manual update of the repeater.